佳能打印机乱按维修模式=亮黄灯=主板已经被锁报废坏掉网络假清零软件导致

Condition of use:
This utility can be used under Windows OS on One PC only per One License.

Canon Service Tool supports following printer models:

G1000 series: G1000, G1010, G1100, G1110, G1200, G1400, G1410, G1500, G1510, G1600, G1700, G1800, G1810, G1900, G1910
G2000 series: G2000, G2010, G2012, G2100, G2110, G2111, G2200, G2400, G2410, G2500, G2510, G2600, G2610, G2700, G2800, G2810, G2900, G2910, G2915
G3000 series: G3000, G3010, G3012, G3100, G3110, G3111, G3200, G3400, G3410, G3500, G3510, G3600, G3610, G3700, G3800, G3810, G3900, G3910, G3915
G4000 series: G4000, G4010, G4100, G4110, G4200, G4210, G4400, G4410, G4500, G4510, G4600, G4610, G4700, G4800, G4810, G4900, G4902, G4910, G4911
G1010 series:
G2010 series:
G3010 series:
G4010 series:

MX320/MX328
MX330/MX338
MX340/MX347/MX348
MX350/MX357/MX358
MX360 series
MX370 series
MX390 series
MX410 series
MX420 series
MX430 series
MX450 series
MX470 series: MX471, MX472, MX474, MX475, MX476, MX477, MX478
MX490 series: MX491, MX492, MX494, MX495, MX496, MX497, MX498, MX499
MX510 series
MX520 series
MX530 serise: MX531, MX532, MX534, MX535, MX536, MX537, MX538
MX710 series
MX720 series
MX860/MX868
MX870/MX876
MX880 series
MX890 series
MX920 series: MX924

MG2100 series
MG2200 Series
MG2400 series
MG2500 series
MG2570S/MG2580S
MG2900
MG3000 Series: MG3010, MG3020, MG3022, MG3040, MG3050, MG3051, MG3052, MG3053, MG3060, MG3070, MG3077, MG3070S, MG3077S, MG3080, MG3090
MG3200 Series
MG3500 series
MG3600 series: MG3610 MG3620 MG3640 MG3650 MG3660 MG3670 MG3680
MG4200 Series
MG5100 series
MG5200 series
MG5400 series
MG5500 series: MG5510, MG5520, MG5540, MG5550, MG5560, MG5570, MG5580
MG5600 series: MG5610, MG5620, MG5640, MG5650, MG5660, MG5670, MG5680
MG5700 series: MG5710 MG5720 MG5721 MG5722 MG5740 MG5750 MG5751 MG5752 MG5753 MG5760 MG5765 MG5766 MG5770 MG5780 MG5790 MG5795
MG6100 series
MG6300 series
MG6400 series
MG6530
MG6600
MG6730
MG6800 series: MG6820 MG6821MG6822 MG6840 MG6850 MG6851 MG6852 MG6853 MG6860 MG6865 MG6866 MG6870 MG6880 MG6890
MG7100 series
MG7500
MG7530F
MG7700 series: MG7710 MG7720 MG7740 MG7750 MG7751 MG7752 MG7753 MG7760 MG7765 MG7766 MG7770 MG7780 MG7790
MG8100 series

MB2000 series: MB2010, MB2020, MB2040, MB2050, MB2060
MB2100 series: MB2110 MB2120 MB2140 MB2150 MB2160
MB2300 series: MB2320, MB2340, MB2350, MB2360, MB2390
MB2700 series: MB2710 MB2720 MB2740 MB2750 MB2760 MB2790
MB5000 series: MB5010 MB5020 MB5040 MB5050 MB5060 MB5070 MB5080 MB5090
MB5100 series: MB5110 MB5120 MB5140 MB5150 MB5160 MB5170 MB5180 MB5190
MB5300 series: MB5310 MB5320 MB5340 MB5350 MB5360 MB5370 MB5380 MB5390
MB5400 series: MB5410 MB5420 MB5440 MB5450 MB5460 MB5470 MB5480 MB5490

TS200 series / E200 series
TS300 series / E300 series
TS3100 series / E3100 series: TS3110 TS3120 TS3122 TS3129 TS3140 TS3150 TS3151 TS3160 TS3165 TS3166 TS3170 TS3170S TS3177S TS3180 TS3190 TS3195
TS5000 series: TS5010 TS5020 TS5040 TS5050 TS5051 TS5053 TS5060 TS5070 TS5080 TS5090
TS5100 series: TS5110 TS5120 TS5140 TS5150 TS5151 TS5160 TS5170 TS5180
TS6000 series: TS6010 TS6020 TS6040 TS6050 TS6051 TS6052 TS6060 TS6070 TS6080
TS6100 series: TS6110 TS6120 TS6140 TS6150 TS6151 TS6160
TS8000 series: TS8010 TS8020 TS8040 TS8050 TS8051 TS8052 TS8053 TS8060 TS8070 TS8080 TS8090
TS8100 series / XK50: TS8120, TS8140, TS8150, TS8151, TS8152, TS8160, TS8170, TS8190, TS8195
TS9000 series: TS9010 TS9020 TS9040 TS9050 TS9055 TS9060 TS9080
TS9100 series / XK70: TS9120, TS9140, TS9150, TS9155, TS9160, TS9170

MP190, MP198
MP230 Series
MP240, MP245
MP250, MP258
MP260, MP268
MP272
MP280 series
MP480, MP486
MP490 series:
MP492, MP493
MP540, MP545
MP550, MP558
MP560, MP568
MP620, MP628
MP630, MP638
MP640, MP648
MP980, MP988
MP990, MP996

iX6500 series
iX6800 series
iX6700 series
iX7000 series

JX210
JX510

iP110
iP1188
iP1900, iP1980
iP2700, iP2770
iP2800 series: iP2870S / iP2880S
Note! iP2850 can NOT be reset by software!
iP3600, iP3680
iP4600, iP4680
iP4700, iP4760
iP4800 series
iP4900 series
iP7200 series: iP7240
iP8700 series

iB4000 series: IB4010, IB4020,IB4040, IB4050, IB4060,IB4070, IB4080,IB4090
iB4100 series: IB4110, IB4120,IB4140, IB4150, IB4160,IB4170, IB4180,IB4190

Pro-1
PRO-10
PRO-100
PRO-100S
PRO-10S

Mark 9000F
Mark 9000F MKII

PRO-500, PRO-1000
Pro 9000II
Pro 9500II

TR7500 series
TR8500 series

E400 series E400 series: E400, E404, E407, E408
E410 series: E410, E414, E417, E418
E460 series: E460, E461,E464, E468
E470 series: E470, E471, E477, E478
E480 series: E480, E481, E484, E488, E489
E500 series:
E600 series:
E560 series:
E610 series: E610, E618

P200
E200 series
E300 series
E3100 series

This Service Tool can make service adjustments and Reset procedures with the Ink Absorber Counter. To reset waste ink absorber counters you have to use Service Tool V5105 under Windows XP, 7, 8, 10 or under other Windows OS in the compatibility mode:

How to Set the printer in Service Mode:

- power OFF the printer by Power button.
- press and hold Resume button (red triangle in the red circle) and press Power button
- hold both buttons until power on indicator will light then release Resume button (dont release Power button) and press Resume button 5 times and for MG series - 6 times!
- release all buttons - the printer will blink few times with green light and will then light green constantly. You have put the printer in Service Mode now and you can now run the Service Tool. (If the printer is still blinking by green - you have some other errors in printer and you have to fix them first, because the Service Tool will not work if the printer is not put in service mode - green light is constant)
4. Run the Service Tool ST5105.exe program.
5. Select the connected USB port number from USB PORT
6. In the Ink Absorber Counter section of the Service Tool, select MAIN from the Absorber pull-down menu.
7. From the Counter Value (%) pull-down menu, select the value (in 10% increments) which is the closest to the actual counter value confirmed before replacement of the logic board, and click SET.
Print EEPROM information to confirm that the value is properly set to the EEPROM.

佳能打印机乱按维修模式=亮黄灯=主板已经被锁 报废坏掉 网络假清零软件导致

Canon Service Tool supports following printer models:

How to Set the printer in Service Mode:

佳能打印机乱按维修模式=亮黄灯=主板已经被锁报废坏掉网络假清零软件导致